ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Hacks (http://www.advrider.com/forums/forumdisplay.php?f=56)
-   -   WUMPA - my DMC Dauntless 1150GS Adventure rig (http://www.advrider.com/forums/showthread.php?t=681793)

DRONE 04-26-2011 06:03 PM

WUMPA - my DMC Dauntless 1150GS Adventure rig
 
Well, I guess we all deserve at least one "ego" thread here in HACKS. Here's mine. The sun came out today and, even though I'm not finished with the set up yet, I dragged my 1150/Dauntless rig out into the front yard for pics today and decided to post them up.

http://i60.photobucket.com/albums/h7...e/IMG_4161.jpg


I got this rig last fall -- a 2004 1150GS Adventure with a DMC M72D sidecar. Spent the winter getting it ready for this summer's riding season (I'm a slow worker.) Between the tug and the tub I got about 70 mods here. My philosophy on farkling is that I want my bikes to perform, but I also want them to clean up nicely.

This is my first sidecar outfit.

Some of these mods cost over $1000 each (car pusher wheel, electric tilt, steering mod), and a bunch of them are so piddling as to hardly deserve mention. But I'm mentioning them anyway. Here goes--


BIKE MODS
ABS-Servo brake modulator removed
Ohlins shocks front & rear (springs painted matching red)
Centerline 4x15 "car pusher" rear wheel on DMC adapter
Vredstein Snow+ 155/80-R15 rear tire
Heidenau K60 Scout front tire
Lucas Alien front rotors
Ride-On tire sealant front & rear
DMC lower fork bridge (trail reducer)
Aeroflow Half-Fairing windshield
Corbin heated seat (also have stock red/black seat)
Happy Trail panniers and rack (powdercoated)
BestRest tail rack
Luminics 6000k 55w halogen low beam bulb
Hella Micro DE fog lights w/yellow 55w halogen bulbs
AdvMonster 3-mode 24w off-road LED driving lights (w/fog light cut-off)
VVME HID high beam conversion
Xpel headlight protection film
Signal Minder
Right side turn signals removed
Rugged Roads running light/brake light LED insert
Hella Supertone 2-tone horns w/Eastern Beaver relay kit
Odyssey PC680 battery
Filler neck drilled
Canisterectomy
Beemerboneyard fuel line quick-disconnects
Alternator cover carbon-fiber vinyl dress up
Exhaust headers ceramic coated
Y-pipe replacement for catalytic front muffler
Lowered rear muffler connector
Boosterplug
FZ-1 Fuzeblock
Kaoko throttle lock
HumVee "GS" graphics
Refinished valve covers
Refinished spark plug covers
Refinished front mud guard extension
Wunderlich yoke protector
Crossbar pad
Oversized rear brake pedal (my own lame design)
Creative Cycle Concepts shift lever extension
Fastway Evolution footpegs
Billet oil filler cap
Fenda Extenda
Bags Connection "GS" Quick-Lock Tankbag w/Zumo mount
Powerlet power socket (panel-mount) for GPS
Coaxial power socket for heated clothing
Genmar bar risers
Stainless mesh oil cooler screen
You might notice something missing from that list--the word "Touratech." :lol3


SIDECAR MODS
DMC electric tilt/trim
1150GS Adventure cross-spoke rear wheel
1150GS brake caliper and rotor
Heidenau K60 Scout rear tire
Ride-On tire sealant
1150GS tail light (matches the bike)
Rugged Roads running light/brake light LED insert
DMC turn signals modified to be running lights too
Southco locking trunk latch (w/steel latch plate)
Givi rear luggage rack (from a V46 tail case)
HumVee "GS" graphics
Custom marine-grade upholstery
Custom seat foam (Sargent "Super Cell Atomic Foam")
Wingbolt seatback mounts (see post 66)
Tonneau cover in matching red
Windshield with matching red apron
Windshield trim in matching red
Body edge trim in matching red
Red polypro step plate
Carpeting - trunk and passenger compartment
Stainless grab bar with BMW-style crossbar pad
Seat belt (guess what color?)
Power distribution plate (for future passenger accessories--heated clothing, GPS etc.--switched and unswitched leads)

Links to additional mods and info in this thread--
Front Shock Rebuild
Rear Shock Rebuild
Sintered Clutch
Dog Platform
Aux Fuel Bottle
Luggage
Sidecar Aux Power Supply
FZ-1 Fuzeblock (discussion starts about half way down this page)
Dual Battery Isolator
Pannier Lid Stay
Sidecar Seatback Mod
Sidecar Seat Foam
Y-Pipe Ceramic Coating
Backcountry pics

Total Weight of the Rig
34/11 Final Drive upgrade
How I pack for camping trips
Breakaway dog restraint
The Wreck in Wyoming

Pics--

http://i60.photobucket.com/albums/h7...e/IMG_4163.jpg

http://i60.photobucket.com/albums/h7...e/IMG_4164.jpg

http://i60.photobucket.com/albums/h7...e/IMG_4165.jpg

http://i60.photobucket.com/albums/h7...e/IMG_4166.jpg

http://i60.photobucket.com/albums/h7...e/IMG_4168.jpg

http://i60.photobucket.com/albums/h7...e/IMG_4169.jpg

http://i60.photobucket.com/albums/h7...e/IMG_4170.jpg


And here's one with the touring seat removed and the "dirt" seat in place, with my buddy Kirby looking on.

http://i60.photobucket.com/albums/h7...e/IMG_4171.jpg


I've taken it for a few "shakedown" rides around town on pavement. As soon as I get a few more problem items taken care of, I'll do a dirt shakedown camping trip to make sure it's set up the way I want it.

A note on the lights. The way I got it set up, the yellow Hella fog lights automatically come on with the low beam. When I switch to high, the fogs and the low beam stay on and the HID high beam kicks in. Then I have another little switch that turns on the off-road lights and at the same time kills the fog lights. That way I'm quasi-legal by having only have 4 lamps lit at any one time. I say "quasi" because the HID lamp and the two LED lamps are way too bright to be D.O.T. approved.

BTW, I didn't just do farkles all winter. This rig was not in great shape when I got it. What you don't see here are all the things I fixed, replaced or updated because they were old or broken or missing. Happily, the engine, clutch, gearbox, final drive, starter, brakes, and all mechanicals are solid.

Any questions about part sourcing or anything else, post it here.

If you want to cut through all the clutter in this thread and only read my updates, get the ADV De-Crufter - HERE. Works great and it's free! There's also a Chrome version in another thread. Find it, get it, use it.

ClearwaterBMW 04-26-2011 06:49 PM

that is ONE SEXY RIG
whew !!!!
beautiful
thanks for sharing

jpalamar 04-26-2011 06:54 PM

Stupendous!
 
Great Job!!!!!! Wow, double-wow!

D.Bachtel 04-26-2011 07:58 PM

Pretty...and pretty Bitchin!
You've got good taste and some tasty details there!
Fantastic... lets see it dirty. What's on the agenda? Patagonia and back?
Damn, that is nice.



Don in Nipomo

Abenteuerfahrer 04-27-2011 07:55 AM

:clap Ach Du Lieber....beautiful. Finally WE see Drones rig after some :huh posts here in the past. Mensch, this is a beautiful job; great innovation. I might even steal some ideas from you with your permission?

Where did you get these "red" edge trimmings?

Where is your Tub brake?

Drone: PM'ed ya....:D.

Melrone 04-27-2011 08:29 AM

:D Nice rig.The colors are bright and good looking.Good luck welcome to the world of hacking...:rofl

DRONE 04-27-2011 10:32 AM

Quote:

Originally Posted by Abenteuerfahrer (Post 15771934)
:clap Ach Du Lieber....beautiful. Finally WE see Drones rig after some :huh posts here in the past. Mensch, this is a beautiful job; great innovation. I might even steal some ideas from you with your permission?

Where did you get these "red" edge trimmings?

Where is your Tub brake?

Drone: PM'ed ya....:D.

Thanks, Abenteuerfahrer.

Ah, yes, the red trim. This stuff is abundantly available, but Googling it is next to impossible. You just can't find it! Even if you go to the J.C. Whitney website (where I found it) and search for it, you can't find it! Unless you know what to call it. HERE IT IS (clicky)! $27 for a 20-ft roll. Also comes in blue, gray, green, brown, aqua, and off-white.

The brake is mounted on the inside of the wheel. You can see the rotor in the "car pusher" pic above. The caliper is mounted at about 2 o'clock if looking at the tub from the right side.

DRONE 04-27-2011 10:36 AM

Quote:

Originally Posted by Melrone (Post 15772174)
:D Nice rig.The colors are bright and good looking.Good luck welcome to the world of hacking...:rofl

Thanks! I guess I should mention that right after I bought the rig I put 1500 miles on it, including 300 miles of dirt. Then I started making my mods. So, yes, I'm definitely a n00b, but I do have a smidgeon of time in the saddle.

Abenteuerfahrer 04-27-2011 10:51 AM

Dronie:D....one more asking,.. from whom did you get the redish GRP step platform material on the Tub and brake pedal?. Looks robust and could make an extended pad for the OEM pegs. My boots sole is only half on the OEM pegs due to having 2 master cylinders connected in tandem: one for the Pucher and one for the Tub. These 2 push my boot outwards.

DRONE 04-27-2011 11:24 AM

Quote:

Originally Posted by Abenteuerfahrer (Post 15773231)
Dronie:D....one more asking,.. from whom did you get the redish GRP step platform material on the Tub and brake pedal?. Looks robust and could make an extended pad for the OEM pegs. My boots sole is only half on the OEM pegs due to having 2 master cylinders connected in tandem: one for the Pucher and one for the Tub. These 2 push my boot outwards.

That red gripper step material is pretty high tech stuff. I think it was developed by NASA for the space program. :rofl Actually, it's just a polypropylene cutting board with some kind of rubbery discs laminated to one side. Costs about $10 shipped for an 8x11" sheet from Amazon, $20 for an 11x14" sheet. Also available in green, blue, orange, yellow, gray and white. HERE'S A LINK.

http://ecx.images-amazon.com/images/...PL._SS500_.jpg

Sidecarjohn 04-27-2011 12:20 PM

Sweet
 
That's a really sweet bit of kit you have there.

Plus, thanks for the comprehensive list of all the modifications and additions.

triumphsidehack 04-27-2011 01:59 PM

steering mods ??
 
Hey Drone : did you do any steering mods and if not , how does it handle ? I did not see a strg damper so I'm thinking it must go down the road correctly and straight. I have a Rocket 111 with a XL on it and it is a little stiff but goes down the road good . Am looking for input to lighten up the strg-ing for the long trips. Great looking outfit you have and good luck and enjoy your new Rig.


Triumphsidehack - D Morgan

OlyRider 04-27-2011 06:40 PM

I'm sure Drone will respond in detail, but he did write that he installed the Dauntless steering mod on the front to reduce steering effort. From all I've heard, this mod works pretty well!

retroone 04-27-2011 07:28 PM

:thumb

NortwestRider 04-27-2011 08:50 PM

WOW,that makes mine look like I built it in a shed for under $1,000...:evil

AMAZING RIG !!.Hope to see it in Chelan !!.


Times are GMT -7.   It's 03:35 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014