ADVrider (
-   Trials (
-   -   TL125 super hard clutch pull, "Now What" (

More CowBell 02-25-2012 11:41 AM

TL125 super hard clutch pull, "Now What"
I got a 74 TL125, it runs great. I want to set it up for my daughter but the clutch pull is way too hard. I got a an easy clutch but didnt make hardly any differance. Can I put in lighter springs? Has anyone else did something to lighten it up?

Twin-shocker 02-25-2012 12:14 PM

I take it you have already fitted a new cable?

welder 02-29-2012 06:21 PM

lengthen the actuating arm on the cases

anonny 03-03-2012 08:55 PM

Oil the cable and grease the moving parts, it will make an amazing difference.

Twin-shocker 03-04-2012 08:38 AM


Originally Posted by anonny (Post 18130899)
Oil the cable and grease the moving parts, it will make an amazing difference.

Not as much as renewing a damaged or worn cable...................

buls4evr 03-06-2012 09:12 AM

Or putting on a new cable from Motion Pro, an EZ Pull and lengthening the arm:clap.

trialxls 04-12-2012 10:20 AM

You can solder /screw a lever extension...

trialxls 04-12-2012 10:38 AM

I tried to answer with a photo, but I am not sure I'm allowed, because it's my first post; I just found this forum today: I am french and offen on honda-125xl dot com forum...

You can solder or screw an arm extension on engine side: I did it on my XLS to get more progressivity ...

Shercoman 04-12-2012 02:20 PM

If a new cable and lubing everything doesn't work....
We used a Magura hydraulic clutch kit on my wifes 400EX to fix this issue.
Pulls with one finger now.

Probably no kit for this bike but a simple bracket to mount the slave cylinder would be easy to make.

Twin-shocker 04-12-2012 10:53 PM

Chinese pit bike hydraulic clutch kit may well fit, and is only about 1/10 of the cost of the Magura ones.

Shercoman 04-13-2012 09:41 AM

Where do you buy those?

Times are GMT -7.   It's 05:32 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015