don't have to cut off the plug!!
If you have an older GS like mine and want to mount the Navigator IV you have to search for a power source and usually cut the plug off the GPS and hard wire it into your power source. Recently Garmin replaced my cradle under warranty, and I decided I did not want to cut the plug off again in case I want to get one of the new water-cooled GS's next year. The parts guy and I started looking for a solution that would allow me to wire something up so that it would be plug and play. There is a harness repair plug available for the later model GS1200's that accepts the Garmin plug. I just ignored the purple center wire and used the red and black when wiring to my parking light socket. Now to remove the GPS cradle, all I have to do is unplug it. Part # is 83 30 0 413 586 and costs about $15.00.
|Times are GMT -7. It's 06:42 AM.|
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014