ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Vendors (http://www.advrider.com/forums/forumdisplay.php?f=18)
-   -   PnP LED Upgrade for your KTM or Husky (http://www.advrider.com/forums/showthread.php?t=821159)

sanjoh 08-27-2012 10:46 AM

PnP LED Upgrade for your KTM or Husky
 
NOT DOT Approved

Headlight Mask shown, not included

Drop in LED replacement light for 2008 Husqvarna TE 250, 450 and 510. May fit other years and models. Installs into your stock headlight mask (not included).

Ten minute install:deal

Includes:
Lexan headlight mount to install in OEM headlight holder. Available in white or black.
Stainless steel hardware to attach light
Plug n Play harness. Connects to OEM connector. Uses your stock high/low beam switch.
Adjustable low beam output
High beam full output
Full directional adjustment of light beam

Weighs 10.2 oz/289 g with LED light, hardware and controls

Bike not included:D
http://i171.photobucket.com/albums/u...n/315dfac4.jpg

Model 60 shown
http://i171.photobucket.com/albums/u...n/2d9ca3a8.jpg

http://i171.photobucket.com/albums/u...n/90dea8a8.jpg

I've been running a model 60 on the street and dirt, the light output is simply amazing. No issues with oncoming traffic.

teambft 08-27-2012 02:06 PM

Ktm 500 exc
 
You got one thats plug and play for a 2012 KTM 500 EXC?
Didnt see it on your site. Thanks.

sanjoh 08-27-2012 05:15 PM

Quote:

Originally Posted by teambft (Post 19457520)
You got one thats plug and play for a 2012 KTM 500 EXC?
Didnt see it on your site. Thanks.

Not yet, in the works. Should be a couple of weeks.

WIthumper 08-28-2012 07:57 AM

Any pics in with black around the light instead of white?

sanjoh 08-28-2012 10:00 AM

Quote:

Originally Posted by WIthumper (Post 19462916)
Any pics in with black around the light instead of white?

Not yet, working on it!

We do however have the KTM 98-04 drop in ready to go.

http://i171.photobucket.com/albums/u...n/ee246a41.jpg

The LEDs need DC power.

WIthumper 08-28-2012 10:17 AM

Order placed and looking forward to having it installed on my TE 610. The stock 35 watt bulb is a joke on the Husky!

sanjoh 08-28-2012 11:12 AM

Quote:

Originally Posted by WIthumper (Post 19463995)
Order placed and looking forward to having it installed on my TE 610. The stock 35 watt bulb is a joke on the Husky!

Thanks for your business!

Prepared to be shocked:deal

You might find yourself wanting to ride the husky at night:evil

sanjoh 08-29-2012 07:35 PM

Here's the Husky PnP replacement light kit.

http://i171.photobucket.com/albums/u...n/dc54ab0c.jpg

Bokrijder 08-30-2012 02:18 PM

John,

Could you verify what is included in the square KTM kit.

Web site reads -- add a controller, and it seems to allude the light is included. (EDIT - Mistake on my part, light is not included but $50 with no controller )
Thread shows Husky kit $50 with included controller.

Thanks,

Bokrijder

sanjoh 08-31-2012 09:19 AM

Quote:

Originally Posted by Bokrijder (Post 19482625)
John,

Could you verify what is included in the square KTM kit.

Web site reads -- add a controller, and it seems to allude the light is included. (EDIT - Mistake on my part, light is not included but $50 with no controller )
Thread shows Husky kit $50 with included controller.

Thanks,

Bokrijder

Yes, the controller is included, I will get that updated.

Can you post up a pic of your headlight connector, want to make sure we get it right. What bike are you considering using this on? Need to verify DC power to the headlight.

Thanks

Bokrijder 08-31-2012 04:53 PM

John

My 2006 KTM 450EXC headlight unit simply uses three individual push-on female connecters which push directly onto the headlight bulb spade tabs. My bike has a homemade harness but I think the individual push ons are standard. The bike lighting system has been converted to DC using a Trail Tech stator and regulator.
I believe most all KTM's were delivered with an AC lighting system, thus will require conversion to DC. One can go the Trail Tech route, or for less money rewire the stock stator (easily done) and purchase a small regulator.

Bokrijder

sanjoh 09-03-2012 05:48 AM

Quote:

Originally Posted by Bokrijder (Post 19491891)
John

My 2006 KTM 450EXC headlight unit simply uses three individual push-on female connecters which push directly onto the headlight bulb spade tabs. My bike has a homemade harness but I think the individual push ons are standard. The bike lighting system has been converted to DC using a Trail Tech stator and regulator.
I believe most all KTM's were delivered with an AC lighting system, thus will require conversion to DC. One can go the Trail Tech route, or for less money rewire the stock stator (easily done) and purchase a small regulator.

Bokrijder

PM Sent, we can supply the spade connectors on the harness.

Black Husky drop in

http://i171.photobucket.com/albums/u...n/edc28248.jpg

clapped_r6 09-03-2012 11:37 PM

is there a reason why the phillips screws are not symmetrical? i hate to be AR, but i am.

i'm not understanding the pricing structure for the ktm drop in. if i order a drop in unit with the 60, it's $160 total for everything (including the controller?)

tia,

sanjoh 09-04-2012 05:35 AM

Quote:

Originally Posted by clapped_r6 (Post 19513824)
is there a reason why the phillips screws are not symmetrical?

Space limitations

Quote:

Originally Posted by clapped_r6 (Post 19513824)
i hate to be AR, but i am.

:deal



Quote:

Originally Posted by clapped_r6 (Post 19513824)
i'm not understanding the pricing structure for the ktm drop in. if i order a drop in unit with the 60, it's $160 total for everything (including the controller?)

tia,

Plus shipping

Bokrijder 09-04-2012 11:24 AM

Tia,

I think Sahjo missed your actual question - is the controller included with the KTM kit ? Yes, it is. Sanjo confirmed with me that the web text stating "no" is a mistake. Don't forget your ADV discount

Bokrijder


Times are GMT -7.   It's 11:43 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014