ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Old's Cool (http://www.advrider.com/forums/forumdisplay.php?f=35)
-   -   Guzzi Ambassador Final Drive Leak (http://www.advrider.com/forums/showthread.php?t=832874)

sigpe57 10-09-2012 10:46 AM

Guzzi Ambassador Final Drive Leak
 
Where is the leak coming from? Is an easy fix of just replace the oil seal or time for a complete rebuild?

Thank you for the reply,

TT
http://i21.photobucket.com/albums/b2...i/IMG_5270.jpg

http://i21.photobucket.com/albums/b2...i/IMG_5271.jpg

lrutt 10-09-2012 11:35 AM

Well it's not an easy fix. Get a manual and assess for yourself

eldomike 10-09-2012 12:07 PM

Easy enough, get a new seal and gasket and do it....

F_Sahms 10-09-2012 02:33 PM

Try replacing just the big seal first. Clean everything well before doing anything.

No gaskets needed, but be careful prying that sucker out. Once it's out, check the seal lip and the surface it rides on for grooves. If there's a groove, you can drive the new seal in slightly deeper or less deep to put the lip on a non-grooved surface.

If you need to replace the big flange gasket, get two. I think there are shims in there between the case and the flange to set the ring and pinion lash. See #24 and #25 here:

http://livinginthepast-audioweb.co.u...p?p=finaldrive

mtiberio 10-10-2012 05:49 AM

ditto... look inside and see if it is coming from inside the spline. if so it is the inner seal. if not it is the outer seal, tit simple to replace. pry old out, hammer new in...

sjc56 10-10-2012 08:26 AM

Best resource on the net for Loop's!

http://thisoldtractor.com/gtbender/m...rear_drive.htm


Times are GMT -7.   It's 01:19 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014