ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   The Garage (http://www.advrider.com/forums/forumdisplay.php?f=50)
-   -   Inline fuel injection fuel pump (http://www.advrider.com/forums/showthread.php?t=856660)

thouk 01-18-2013 09:38 PM

Inline fuel injection fuel pump
 
Hello Y'all,
I am trying to piece together the parts to fuel inject my Honda Xr650r. I am looking for an inline fuel pump for a fuel injection setup that isn't too big and has low amp draw. Do any of you have any suggestions? Thanks, Tony

Hootowl 01-19-2013 08:36 AM

There might be some clues in this thread
http://www.advrider.com/forums/showthread.php?t=593606

victor441 01-19-2013 09:33 AM

There is some good info here on a DR650 FI project that would probably be helpful on the pump and in general...
http://drriders.com/topic2824.html

anotherguy 01-19-2013 09:34 AM

Here ya go. What are you using for a throttle body?

Mook62 01-19-2013 08:12 PM

Fi "kit"
 
Check out the link below. Looks like it would be viable to FI you're bike. All of the hard stuff is done, you plug and play.

http://www.ecotrons.com/400cc_to_800...e_EFI_kit.html

http://www.ecotrons.com/website/400cc_800cc_EFI_kit.jpg

thouk 01-20-2013 09:39 AM

My throttle body
 
Anotherguy,
I bought a Honda Trx700xx throttle body off of eBay. I also ordered a throttle boot for it from the local dealer. The boot fits right up to the head on the Xr fine. It is a little snug but it fits. The intake side of the throttle body is smaller than the stock carb or the Edelbrock that is going to get replaced. I may have to machine an adapter for this connection. The other possiblity would be to make a new airbox that that I could have more room for the Microsquirt that I am going to buy along with a better regulator/rectifier. I am thinking of using the Ltr450 fuel pump. I got a fuel tank from a Ltr450 that has the pressure regulator and the filter assembly with it. That should be in on Wednesday. Now I just need to reassemble the engine and get to work on this. I just started back into school so this is a back project to graduating. Thanks for the help, Tony

CycleDoc59 01-20-2013 06:49 PM

Quote:

Originally Posted by thouk (Post 20522531)
Hello Y'all,
I am trying to piece together the parts to fuel inject my Honda Xr650r. I am looking for an inline fuel pump for a fuel injection setup that isn't too big and has low amp draw. Do any of you have any suggestions? Thanks, Tony


Here's one: http://tinyurl.com/alqb6qf


Times are GMT -7.   It's 07:34 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014