View Single Post
Old 07-20-2009, 10:43 PM   #7604
Ben99r1
Beastly Adventurer
 
Ben99r1's Avatar
 
Joined: Mar 2006
Location: Pomona, Calif.
Oddometer: 2,995
Quote:
Originally Posted by tjschul
Completed Dave's carb mods and have a few questions for the CV experts.

The bad flat spot I had off idle when I whack the throttle open is ALMOST gone.
In the past I've raised the float level a tad to richen up the off idle response.
Float adjustment is not possible with the XRL carb....so will clipping a coil or two off the slide spring help? Or will further enlarging of the two slide holes yield positive results?

Have opened up air box, aftermarket exhaust, K&N filter.
Current jetting is 150 main, 60 pilot with air screw 1 1/2 open.
(couldn't find a 55 pilot anywhere).
Try Jetsrus.com they will have the right jets for the xrl. Try 55pilot 160main 2 1/2 turns out fuel mix screw. order a few larger and smaller jets just in case. Ben

thanks
JS
Try Jetsrus.com they will have the right jets for the xrl. Try 55pilot 160main 2 1/2 turns out fuel mix screw. Order a few larger and smaller jets just in case. Ben
Ben99r1 is offline   Reply With Quote