View Single Post
Old 10-07-2009, 07:48 AM   #68
"A"'s Avatar
Joined: Aug 2008
Location: Albany Western Australia
Oddometer: 378
Originally Posted by Rordog
Just wanting to know if there are any tricks about taking the forks apart to put new springs and oil in. Do I take the caps off, then drain the oil, and install new springs and oil. I've looked all over and cann't find any information. Anything would help.
I put in a set of Wilbers. They provided instructions that gives the info needed. It required removal of the forks from the bike, taking caps off etc. Correct procedure to put in the right amount of oil and purge out air is explained. Hope this helps.
"A" is offline   Reply With Quote