View Single Post
Old 10-24-2009, 07:35 PM   #4
Dusty
Beastly Adventurer
 
Dusty's Avatar
 
Joined: Jun 2007
Location: Bismarck
Oddometer: 1,177
Thumb good post

Did you happen to save the sock filter? somebody here was looking for one to try to find an after market that would fit... see if i can find the post...

This is how my 1st set looked after 8000 mls.




I was able to get the plastic housing apart with a little screw diver and only one set of hands...


One thing that gave me a little trouble was when i put the plastic filter housing back on the pump , i heard the metal clips click but it wasn't completely seated and it ran like shit. So make sure that it gets seated...

I am on my 3rd set with 22,000 mls, i put in the 2nd set at 18,000 and it didn't look nearly as bad as the 1st set, i reused the big o-rings on this change without any problems so far. I also didn't find much crap in the tanks...

My old thread...http://www.advrider.com/forums/showthread.php?t=372139... I didn't get a pic of the rubber thing under the pump either...

Also in... HOW
__________________
Originally Posted by d0gWateR
Vagrant, vagabond, transient, hobo, bum. But park a motorcycle next to him and PRESTO! He's an advrider!

Dusty screwed with this post 10-24-2009 at 07:40 PM
Dusty is offline   Reply With Quote