Ok I located the area you described from the Parts image and found a Rubber cover and two bolts. A smaller bolt that screwed into a larger bolt.
I unscrewed the larger Bolt and left the smaller bolt on.
I did some research online that said to insert a bolt and adjust the timing. I found a bolt that fit and begain to adjust it. I was able to push it down and pull it up but it seemed only the middle moved and then went back to it's normal position. This made no difference in the bike running wise.
What did I do wrong and how do I adjust the timing? Do I need to replace the spring that you had mentioned earlier and if so how do I do that? Trying to get the bike running good before x-mas thanks again!