Originally Posted by wickit
Thanks for the info...started to put the vapor on tonight. I have it mounted with the plastic clamp, but will move it down to replace the stock odo after I do some gearing tests. How the hell did you get that cheap screw to thread into your caliper? No way in hell will it work, Trying to find some info on a metric tap.
I added one to my YZ. TrailTech instructions are as follows:
"With the sensor held down firmly in the correct position on the caliper, insert an ink pen through the mounting hole on the sensor to mark for the drill location. Remove the sensor and drill a 1/8” hole through caliper mount. Use
a sharp drill bit! Attach the sensor to the caliper mount with the screw provided. This is a selftapping screw - the hole size must be 1/8”."
Worked just fine for me. Problems came later - use the billet mount - brake line caught on a jump. Unit does not like water - mine started fogging up from heavy rain and eventually died.