i used alumalloy rod yesterday to fix a crack in a swingarm (not a load bearing part of swingarm..) - worked fine - we'll see if it holds up in a bout a week,. you need mapp gas or hotter (propane won't work on anything thicker than pop can.) area must be clean. you need lotsa heat. it's just like soldering..only much much hotter.
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more