- Did a oil change and Valve clearance check. All valves are still within spec. (not today)
- forgot to install the copper washers on drain plugs (both) and had to get some hot oil on my hands to put them back again.
- flushed and cleaned clutch slave, refilled & bled with motorex min oil
- lost the little grey cap on the slave bleed screw
- stripped the threads on the engine support (where bash plate screw goes in)
- forgot to clean the clutch oil jet
- took off the tank guards, rear rack and spare tubes in the front fairing (will be doing some more desert runs and want to reduce weight)
i've been getting closer and closer to her........... she only hits back occassionally