Originally Posted by AlpinaE24
Can we get a merge on all these threads?
Not really, it's the whole point of Krusty's DR650SE Index.
Greg@RME Ignition Switch Removal:
Edit to add another thread on switch removal: http://advrider.com/forums/showthread.php?t=700534
Including this by Dukegnarley:
"I did some searching and came up with an answer on another board. The way to add a different switch is to....
1. Cut the pigtail off of the original ignition switch
2. Connect a 100 ohm resistor between the black/white and orange/yellow wires.
3. Connect the brown and grey wires together
4. Run the red and orange wires to your new switch.
I haven't actually tried this yet to confirm it, but I will in the next day or so."