ADVrider - View Single Post - 69 BSA bobber project...or...the cure for wintertime madness!

YZman · 02-10-2011, 05:59 PM

Got fuel lines ran. Still need some clamps. They are on the way

Got the exhaust finished. Im pretty stoked with these.

That marks the end of the fabrication. No more welding needs to be done. Its finished. Just needs to oil lines, control cables, wire it and see if it will run then tear it all down, sandblast it and re-assemble.

Plus a lot of other things I know I have forgot

02-10-2011, 05:59 PM	#417
YZman ^OP Bouncing off Trees Joined: May 2006 Location: Meeeechigan Oddometer: 1,100	Got fuel lines ran. Still need some clamps. They are on the way Got the exhaust finished. Im pretty stoked with these. That marks the end of the fabrication. No more welding needs to be done. Its finished. Just needs to oil lines, control cables, wire it and see if it will run then tear it all down, sandblast it and re-assemble. Plus a lot of other things I know I have forgot