Quote:
Originally Posted by JohnBryer
it'll be inside a tank bag. 6-8 inches would be plenty. SAE on 1 end, and 2-3 USB ports on the other side to charge phone, GoPro, or most any other device would be awesome.
|
John - we made a couple of attempts to get something that looked decent but can't get there with shrink tube. If there is enough demand we would have to go to our cable supplier and have the junction molded for a saleable product.
Here's the prototype. As you can see it is butt ugly. One thing we did was add both the male and female SAE 2-pin connectors so power was still available for other applications. Even with three TAPPs we are drawing less than 2A so there's plenty left on a 15A circuit.
