Originally Posted by frdbronco8
Im going to try to check the coil(s) tonight. Laramie posted what the ohms should be for me on TT. I have never done this and dont even know where to put the meter to test. Anyone have pictures?
just read the pig tails coming out of the coil. it's easy, the blue/white wire is obvious, use the green as a ground or any other good ground. the "ignition wire" is your plug wire.
since this happens when the bike is warm i would be concerned that you may get diff results cold.
in the mean time, i would be looking at every single connector plug and every wire. i know its hard to check all the wires without stripping the bike but do your best. pay close attention to anything that is close to the engine or exhaust.