Originally Posted by frdbronco8
0,425-0,575 (is that the same as .425-.575 on the meter?) When I set the meter to the 200 range it reads .7 Any other setting on the meter and it reads 000.
The coil to plug wire give me a no read indicating no matter what setting its on. (On my meter its a 1 at the front of the display, same as when the leads are held apart and not touching anything).
yes, 0,425 is the same as 0.425 ohms. as for your settings im not sure, my multimeter does all that shit for me, i just have 1 ohm setting.
remove the ignition wire and read off the coil, see if that changes the numbers. you may have a bad plug wire.