View Single Post
Old 07-07-2011, 06:35 AM   #19
I ride
fbj913's Avatar
Joined: Nov 2007
Location: KC MO
Oddometer: 2,402
Originally Posted by Burren Rider View Post

As delivered, the bars area really low and this made standing on the pegs fairly awkward. The solution seemed to be rolling them forward (and up) in the clamps which improves things immensly. I am now beginning to think a different bend of bar is called for though as they feel a little too far away when sitting. I have a set of Henry/Reed Pro Tapers left over in the shed so I will try those (they seem to have a bit more sweep) and see how they go. One thing that needs doing when moving the bars up (or switching them) is grinding off the little locating tabs in the switch blocks. Two minutes with a Dremel and the job is done.
Great write up! I thought the same thing then I installed some Rox Risers. They fix the problem 100%
fbj913 is offline   Reply With Quote