Originally Posted by HickOnACrick
This is some great information. I was wondering if you can relate any experience you have with the Raka epoxies versus the West System. Raka makes a claim that their epoxies have less cratering and pinpoints when cured, as a result of additives to the epoxies. Do you have any experience with this?
Also, you have given some great information about finishing by using different sanding methods. Do you have links to video to demonstrate these methods?
Thanks again for your great input.
You might want to check out Silvertip epoxy. It is a lower viscosity epoxy and ends up with less surface imperfections and no amine blush. The downside is $$$