Originally Posted by Davis53
I have a 2009 R1200GSA, to do a sync is this correct?
Connect sync device.
Remove the plugs for the steppers motors.
Sync engine at speed above idle, 2000 rpm, 2500 rpm, etc. with the cable on the right throttle body.
Shutdown engine, remove sync device, connect stepper plugs.
The steppers set idle speed and idle sync.
Is this procedure correct?
Pretty much. Here is the process: http://www.jimvonbaden.com/R1200_TB_Sync.html
Use the Harmonizer instead of the Twinmax.