[HighTechCoonass]

Thanks for the kind works! I added my switch location to the install pics...

The latest Power controller has a longer switch wire to move to a further location.... also the BMW plugs now are sealed with heat shrink with "Hot glue" inside! Very tough stuff!

The install....

Originally Posted by HighTechCoonass

Originally Posted by HighTechCoonass
Step one.....


Step 2.....


Step 3....



Step 4 ....

Use sticky to stick down a base and tyrap the sensor to the "stick base"




this is where i have my switch....




operations: the "red paint" on the switch is for -10 offset (above 85 deg F) away from the red paint or blue is for -20 deg c) when temperature is below 85 deg F.)

any question PLEASE send me a PM!!!!!! I check a few times a day!!!