Originally Posted by Gundy
I installed a Moose 1/2" longer shifter, and when I installed it angled it up slightly from the stock position. Works well for shifting in a standing position and with MX boots. I carry the stock as a spare just because I am paranoid about breaking it in the middle of nowhere. As far as adjusting the angle, just loosen the bolt, pull the lever off and put it back on at the different angle. You will need to match up the splines, but that is the only slightly annoying part of the process.
I guess I should add that some folks have just learned to shift with the side of their boot.
Thanks for the info! Will go adjust the shift lever now and give it a go from there. Super warm in Idaho today, I think a Thanksgiving ride will be deemed nessacery after some turkey.