View Single Post
Old 11-25-2011, 03:21 PM   #14293
Makis54's Avatar
Joined: Feb 2008
Location: Western NC
Oddometer: 81
Originally Posted by wildjester View Post
Thats my plan. I'm thinking of grinding the four spots and hoping it pops off like magic!
Well, I wouldn't say that it popped off like magic, but it did come off. Be careful while sanding or grinding as it is easy to go too deep and get into the head light mount. There was also some rust under there. I am going to sand it and touch it up with some rustoleum satin black. I've found it is close to the stock frame color. The relocation mount I used was from Joker Machine and there were some issues. The holes in the bracket were drilled and tapped too small for the stock bolts and the bolts supplied that mount the bracket to the frame are the wrong thread pitch. I don't know if anyone else has experienced this or not, but I plan on contacting Joker Machine to see if it was a fluke or not.
Makis54 is offline   Reply With Quote