Originally Posted by Alejo
I took out 3.6 liters, I put 3 liters of new synthetic oil and did what ever the manual says and the mark is still on the min mark.. WTF I donīt understand..
You are supposed to check the oil with the bike hot.
After you drain the oil, put 3 liters in. Then start the bike and let it warm until 4 bars on the temp gauge. THEN check your oil (remove the dipstick, dry it, screw the dipstick all the way back in
and then remove it and check the level).
Then put oil in until you are at the desired level.
Make sure your bike is level and on the CENTER stand.
Hope this helps