Originally Posted by sailah
Depending on the diameter, check cone engineering, they have lots of bends in all types. I needed the exhaust pipe size which was 60mm . Totally weird size forget but I found tuner stores sell tubing by a company called vibrant. Wasn't cheap but you don't need too much. Def buy more than you think you need, tack it up on the bike and back purge with argon.
I've decided to buy a second set of ninja headers on ebay. After pricing it out on ebay I think this is the most cost effective solution. I have an extra z750s muffler or 2 I might cut up and use.
Current bikes:2006 DL650
Past bikes: 2008 WR250R, XT225, TTR125, '04 CRF50 '74 DT125,'70 TS250,'85 v45, '89 zx600c, '78 GS400x, '99 GS500E, '01 GS500E '05 Z750s, '77 GS400e, '82 GS1100ez, '97 GSX600, '07 VFR800, '03 KLR650, '03 FJR1300, '06 DL1000, '00 KLR650, '99 WR360, '08 DL650, '05 DR650, '08 EX650r, '96 CR500, '82 GS450T, '06 Ural