Originally Posted by sanjoh
It looks like you are really close to an optimal position. If you only need a few degres of movement, I would grab the light and gently bend the bracket. If you are more than a few degrees, I'd recommend unscrewing the heatsink and flipping the mount bracket 180 degrees.
Could you describe the flickering you are seeing with the lights? Does it happen with the high beam on?
The flickering happens when they are dimmed, kind of like a pulsing. It doesn't happen if they are almost full power. More on the left side which has longer wires going to it. (farther away from the dimmer)
Also is it normal to not be able to get full power using the dimmer unless you hit high beam?