Originally Posted by Gypsy_Writer
I don't mean to hijack the thread, but what is the bearing size on the Ninja wheel? I'm ADV modding a first generation SV650 and they run a 17" wheel that is a bit expensive if damaged.
the Ninja/Versys motos use a 20mm axle on both ends, while your first gen SV uses a 17mm. the second gen SV went to 20mm. you can check the Ninja bearing size, then see if you can get it in a 17mm ID. Ninja wheels can be made to work on a SV, but the early SV wheels are cheap on Ebay, so why switch?
i'm using a second gen SV rear wheel on the V649.