I had a very generous donation of parts provided to me and my son, to contribute to his efforts in getting to the ISDE in Germany this September. I have a separate thread documenting his experience thus far in preparing to represent the U.S. next month:
Most of these parts are for the RFS generation of KTM four-strokes (primarily 450 and 525’s). There are some parts that are for the newer KTM body style of bikes. All money generated from the sale of these items will go directly to the cost of Josh getting to Germany.
I have whole bunch of Keihin FCR carbs. It appears most of these are in the 37mm-41mm size (I’m basing this off of a measurement on intake side of the carb). Most all of them are complete, but there are a few that are missing the slide, or the choke knob (just the plastic knob part). I will gladly send detailed pictures of any of them. Retail, most of these are carbs are close to $1,000 direct from KTM. On eBay and online classifieds, most of them appear to be going between $175-$400. I will sell them for $100 for a complete carb and $50-$75 if it is determined that the carb is not complete and you are interested in it. $10.00 for shipping within the Continental U.S. If you receive the carb, and determine it won’t work, I just ask that you pay for shipping back to me and I will refund you your money.
Cycra handguard Mounts. Some appear to be for fat bars and others for regular bars. These are $42 on the Cycra website. $10.00 plus $5.00 shipping.
I’ve also got a whole box of other miscellaneous Cycra handguard mounts for the flag style. $5.00 a set.
Hinson inner clutch hub. Brand new in box. I have 3 of them (they are marked as being for a 525).
Outer clutch and ignition covers for a 450/525. I admit I don’t know what the XC4 cover fits. $20.
Shift drum/barrel. I’m pretty certain this is from a 525 or 450 RFS. If you want it and it doesn’t work, just pay to ship it back to me. $10.
Tusk clutch springs for a 525/450.
Inner clutch hub (also have the main ring gear and pressure plate). Will sell separately for $25 a piece or $75 for the combo.
Pic showing them together.
Also have brand new Hinson backing plate to attach the ring gear on the back of the clutch basket (don’t have the stock rubber cushions).
Not sure what cover this fits, but if you recognize it, make an offer.
New ratchet gear for kick start. I assume for a 525/450. $5.00
I’m not sure what this is, but if you recognize and need it, make me an offer.
Ignition/stator. I have to assume this was in working order and is for a 525/450. $25 (plush $10.00 shipping). If it doesn’t work, pay for the shipping back and I’ll refund your money.
Brand new Hinson clutch cover. $30.
I have several of these. They are brand new radiator hose kits. The package says for a 450SX, but I assume they will fit a 450 or 525 as well (the person I obtained these from was a big 525 fan so pretty much everything came from a 525). $20 plus shipping.
KTM mud flap. $5.00 plus shipping.
KTM thermostat. $5.00 plus shipping.
Radiator hoses. I’m not sure if these are for a 450/525. It is either that or they came off a 2011 KX450F. If you recognize them, and want them, $20 plus shipping.
Used KX450F (from a 2011) plastic. $20.00 plus shipping.
Used plastic from a KTM 450/525. There is also an air intake boot. One of the air filter covers appears to be off a newer 530 style bike. Make offer.
Complete stock triple clamp assembly from a 2011 KX450F. $40 plus shipping.
Brand new Cycra rear fenders. These appear to be for the 2008 and newer style bikes (until they were changed ….in 2010?). $20 plus shipping.
Subrame….I honestly don’t know what this is off of, but I assume a KTM 450/525. I will gladly take measurements. $50 plus shipping.
I tried to take a picture of the part number on the plastic of the subframe above.
Stock Renthal bars off a 2011 KX450F. $20 plus shipping.
Renthal Fat Bars. I’m not sure of the bend but can get a part number off of them. $30 plus shipping.
Stock seat. I assume from a 450/525. $30 plus shipping.
SDG Tall Seat. Once again, I assume for a 450/525 RFS bike. $50 for the tall seat. There is also what appears to be another tall seat foam but it does not have an SDG seat cover on it. $50 for that one as well. There are three seats in total. A stock one that appears to be stock foam height and has a tear in the seat cover. There are then two other seats….one with an SDG cover on it and clearly marked as “Tall” and another that doesn’t have SDG on it, but seems to be the same height. $50 for tall seats, $25 for stock seat.
Rear fender, license plate holder. These appear to be brand new. $10 a piece (I think these are off the 2008 and newer style fenders.
Front fenders, 2008 and newer for KTMs. $10.00 plus shipping.
Thank you for your interest, and please remember that all revenue generated from the sale of these parts will go directly to my 17 year old son Josh who has qualified to represent Team USA in Germany this September. His PayPal account is JoshKnightISDE@gmail.com
We live in Utah and I can ship anything via USPS priority mail for $10.95 if it fits in one of their boxes. Smaller items I might be able to ship for cheaper and larger items may be a little more depending on location.