Originally Posted by MeefZah
I used them after the second time my left seal started puking oil.
The left one lasted about 200 miles before the compression action of the fork and the pressure of the fork protector wore a hole in it.
If they had remained intact I guess thay might do the trick but with a quarter sized hole right where the seal is they served no purpose; I cut them off.
The left hand fork slider will rub the plastic guard on all WRR's if you don't heat them up and bend them out of the way. When you ty-rap a seal saver to the top of the slider it's even more prone to rubbing.
I have ridden with riders using seal savers when it's raining and muddy, and they don't skim the muddy water off the fork tube, and to make things worse they trap the muddy water under the seal saver which turns them into sand paper. After I saw that I made the decision they weren't for me.