Originally Posted by rexbro
My 2610 had the same problem a few years ago (I think it's the same basic construction) and I found the usb connector was broken off of the circuit board.
Here is a link to my repair:
The other thing that it could be is the little tabs on the back of the board need to be bent out slightly to contact the main board when re-assembled.
Thanks so much, Tom!
Eventual Master of the Obvious
2005 R1200GS | 2013 R1200GSW | SOHC4 208 | DoD 2032 | BMWMOA | BMWRA | YB