View Single Post
Old 09-09-2012, 06:12 PM   #6
ZugBug
Adventurer
 
ZugBug's Avatar
 
Joined: May 2009
Location: Philly PA Area
Oddometer: 42
Quote:
Originally Posted by Dorito View Post
Yes, I agree for the Touratech mount is nice, and I have one mounted on another bike. However, because the wiring configuration for the Zumo 660, you aren't really "hot swapping" the Touratech with multiple bikes easily.

So here's what I ended up doing:



Here are the parts sourced from Lowes:
The Hillman Group Spiral Wrist Band - Plastic Key Rings Item #: 33287 | Model #: 701304
Gardner Bender 10-Piece 1" X 1" Black Mounting Pads Item #: 292685 | Model #: 45-1MBUVL

From auto parts store:
3M VHB Tape 4910 Clear (It comes with foam tape, but I have really good luck with this stuff)

I hang the wrist band off the mirror mount. Works with both mounts I have including touratech locking mount and the stocker Garmin mount.

I did the same thing with my 660 as Dorito with the small variation of using a small dog coller (Target) with Fastex buckle. I cut it in half and attached one side to the zip tie mount and the other to the bike. There was a little sewing involved. Works fine.
__________________
ZugBug
ZugBug is offline   Reply With Quote