View Single Post
Old 09-17-2012, 05:35 AM   #11602
VTT
n00b
 
Joined: Nov 2007
Location: BlackForest
Oddometer: 3
Quote:
Originally Posted by Markus_w View Post
Hi all,
Due to my height (195cm) I wish to increase seatheight and legroom with installing AQ front and rear underbody heightening/lift kit and Motobau lower footpegs.
My questions are as follows:

1. When installing the lift kit will the standard cables do it or do I need to replace them with longer cables? (brakes/speedometer etc)

2. With Motobau lower footpegs do I need to modify brake lever to get it in correct height for the lower pegs?
I have searched through the forum without finding answers to my question and I have previously been in contact with AQ without receiving respond hence why I'm asking here.

Thanks in advance,

Br Markus_w
Hi Markus

you lift the suspension for how much?
Doing so I would recommend anyhow to replace breaklines with aftermarket steel-flex which you get in any lenght.
I have some Spiegler (not on market anymore) with additional 2cm for my bar raiser.

Taking the AQ Front (check for the polish one which might be an option) you replace the speedo anyway, don`t you? Otherwise, I assume from my knowledge, you need to replace the drive cable for the speedo. It has only some reserver orginally.
austrian http://www.ebay.de/itm/Ralley-Light-...item564a32a918
polish link i did not get yet but german ebay gives an email owiewki(at)gmail.com

Motobau pegsyou can use with the original breakgear hence you need to adjust position of the lever.
http://www.africatwin.de/phpbb_x/vie...hlight=motobau

If you do understand german or give it a chance to understand a german writting english you might check the german board. We do all kind of changes and for sure you get details on Motobau pegs www africatwin de .

regards
Heiner

VTT screwed with this post 09-17-2012 at 05:48 AM Reason: add email addy
VTT is offline   Reply With Quote