View Single Post
Old 09-18-2012, 09:21 AM   #11605
Africa Twiner
Africa_Twin's Avatar
Joined: Oct 2009
Location: Lisbon, Portugal
Oddometer: 363
Originally Posted by Ladder106 View Post
On the RD03 and 04, you should be able to remove the brake master cylinder arm on the inside of the frame tubes from the splines on the brake pedal and rotate the pedal downward a few notches. Dunno specifically for the RD07 but I'd assume it's about the same
It is! I've done exactly that to my RD07a.

There is a small rubber dust cover on the pedal, just be carefull not to pinch that when re-inserting the pedal after realignment.
Riding to the sunset... on my Africa Twin...
Africa_Twin is offline   Reply With Quote