View Single Post
Old 09-26-2012, 05:50 PM   #3
Wrench Rider
CycleDoc59's Avatar
Joined: May 2006
Location: East Virginia
Oddometer: 984
If it might help, an Iron Butt rider friend who would go thru 10+ tires a year
made his own; simple, cheap.

A 30 gallon barrel w/one end cut out and covered with heavy heater hose.
Then a pipe installed thru the drum about a foot from the top to provide
an anchor point to hold the wheel in place. The drum was full of rocks
to keep it stable. A decent bead-breaker and a few good tire irons and
you are in business.
CycleDoc59 is offline   Reply With Quote