View Single Post
Old 09-30-2012, 11:22 PM   #12
vwboomer
Buffoon
 
vwboomer's Avatar
 
Joined: Feb 2008
Location: WI
Oddometer: 9,476
Quote:
Originally Posted by LexLeroy View Post
I'm using the Moose Racing version with a No-Scuff bar from Dave Anderson. Since the picture was taken I've mounted the stand to a 2' x 2' piece of 1/2" plywood and replaced the cheesy 1/2 x 13 tpi center rod with a piece of 5/8" Acme threaded rod. I bolt the plywood base to the garage floor with a couple of 3/8" anchor bolts when I'm changing tubeless tires with the No-scuff bar, but that's not necessary with tube tires and tire spoons. It paid for itself pretty quickly.

I find the threaded rod to work ok, I usually dont even fasten the wheel. I need something for breaking the beads on the 950 wheels though

I think if I ever get a flat offroad I will walk out






Quote:
Originally Posted by ROUNDSTOCK View Post
make a mount for your reciever hitch on your truck. portable and sturdy....................steve
not a bad idea, but I never disconnect the trailer. one could also cement a piece of 2" square tubing in the floor for the same result
__________________

vwboomer is offline   Reply With Quote