View Single Post
Old 10-07-2012, 09:49 AM   #39
runnin4melife OP
Studly Adventurer
 
Joined: Mar 2012
Location: Maryland (I hate DC traffic)
Oddometer: 763
Quote:
Originally Posted by ebrabaek View Post
As long as you have the garage over 75 deg. F. It will cure over night. If you want to speed things up a bit, then hop over to the hardware store, and spend 15 on a 150 watt or heat lamp.... Get the matrix to about 100-125..... It'l now set in a few hrs.
Roger Doger, I already have that setup. I went ahead and built a small 4x4x4 paint booth to house the setup to keep dirst/dust out of it as well as have to heat lamps to maintain temp etc... It is starting to get cool here in MD so this will most likely be the option I utilize.

Last pressing question I have, as far as the foam mold I am utilizing. Once I have it sanded down it is still fairly porous, do I still apply wax/parrafin to get it to release or should I first coat it with resin and let it cure then use that as the base for the mold before proceeding to the CF?

Sorry for so many questions I just don't want to waste a lot of time or material learning simple things I could avoid.
runnin4melife is offline   Reply With Quote