Originally Posted by canoli
Since I tend to ride to far out of the way places that are devoid of fuel stops, I REALLY do need every last drop of gas in my Safari tank. So my question for those of you that have done this mod to the carb, is it REALLY as easy as the video shows? Is there a special "trick" to not breaking off that elbow that the video doesn't show? I don't own a bench vice and because of my lack of mechanical skill, would rather not remove the carb.
Been there. With carb on bike and heated got about 20 deg. rotation. Tried for more and the tube kinked. Still runs fine 6K miles later. I'd probably leave it be or pull the stock tube and drill/tap for a straight fitting.