View Single Post
Old 10-11-2012, 12:22 AM   #9
Clay Spinner
Woodfire or Bust
 
Clay Spinner's Avatar
 
Joined: Nov 2008
Location: Nova Scotia
Oddometer: 584
AS above, caliper from a g/s will not fit on an st... the mounting holes are further apart. However the ST mounting points are the same as the r100gs and will therefore accept the brembo caliper from the r1100gs, with a slight bit of machining on the tabs..I think you need to take of 0.158 inches but its worth checking.. you'll have a very good front end. I have that setup on my ST and the front brakes are great... on the g/s...not so good!
Clay Spinner is offline   Reply With Quote