View Single Post
Old 10-12-2012, 07:14 AM   #70143
Beastly Adventurer
sandwash's Avatar
Joined: Oct 2007
Location: Flagstaff Az
Oddometer: 1,371
They placed the roller too low on the frame,under the right conditions the chain will want to straighten out and will take the roller out along with part of the frame.Remove it and replace it with a locktite set screw.Then replace lower one with a bearing type,won't be as noisy as the stock one.This is where the upper roller used to be:

sandwash screwed with this post 10-12-2012 at 07:31 AM
sandwash is offline   Reply With Quote