Originally Posted by manfromthestix
The comment - I'm not sure how you overfill the FD unit. IIRC, the manual says fill to the bottom of the threads and that's just about as much as you can get in there without it drooling out. If you were somehow able to overfill it, it's vented and would likely just blow out, right?
My 2010 GSA does not have a vented final drive. It does not have a fill hole to fill to until it gets to the threads. My R1100GS did but this one is made entirely different. On This model you have to measure out I think it is 300 ml's and fill at a weird angle with a funnel after removing the rear wheel!
Alicia from The Left Coast. IBA # 45858
2010 GSA, 2008 KLR650, 1995 GS (Sold), 2005 ST1300 (DEAD)