Originally Posted by noahdr
Can someone help here...
I bought my WR 6months ago or so and it came with a yamalink installed. The more I ride the more I realize I want the bike back to where it was at stock height. I understand how to re-install the stock link, but how much do I raise the jam nut etc to achieve the stock height from factory? Also, it appears the forks have been raised in the clamps on the front. How much do I move the front forks to get the factory setting...or do I just move them as far I can before I hit the caps?
Thanks in advance!
Look through here: http://www.supermotojunkie.com/showt...Lowered-WR250R
This might help you get it back to the OEM settings.
Noise annoys, ride stealth
Member: CCCOFVT, MVTR, NETRA
2013 KTM 500EXC