When I got home from work last night, Luke and Doc Sprocket (and Larry & Danny) were busily working on the CBZR-650 frame. Pretty soon Ken Fisher stopped by to pick up a truck we had worked on for him and dropped off some of his delicious beer. Ken Fisher is the mastermind behind Grateful Deaf Brewing and an old friend and classmate.
Luke seemed to like Ken's beer;
Later in the evening, we dug out the 110V wire feed welder (it hadn't been used in at least five years) and after several adjustments and test welds, used it to weld in two additional footpeg mounting bosses. The initial welds weren't pretty, but as soon as a dedicated power supply for the welder with the proper amps is installed, we should be good to go for smaller gauge welding projects.