Thread: My ADVersys
View Single Post
Old 10-20-2012, 05:05 AM   #86
kajj OP
Gnarly Adventurer
 
kajj's Avatar
 
Joined: Aug 2011
Location: In northern Sweden
Oddometer: 191
Air filters

I have found some dust that got past the OEM air filter and decided to try adding one pair of UNI pod filters to the
intake stack. It will of course decrease air flow a bit. but I thought I should try it out and see how it works.


I removed some material from the inside of the filters to get a better fit to the bellmouths.





The filters do compress a little when the lid for the airbox is mounted. Should be fine thou.



And some eye candy


Now, back to designing that brake caliper adapter.

Things to do!

* mount new brake line.............................................. ......ok
* Find a 310 mm disc.............................................. ........ok
* Finish wheel axle.............................................. ............ok
* fabricate brake caliper adapter
* headlight rubbermount....................................... ... .........ok
* new rally fairing
* carbon fiber dash, relocate switches and power outlets
* relocate turn signals
* Weld and paint sidestand
* Install HID lights
* mount radiator guard............................................. .....ok
* cut front fender and fabricate mount..............................ok
* change sprockets and chain...................................3/3 ok
* Air filters........................................... .........................ok
* paint luggage rack
* tighten side mirror mounts...........................................o k
* check rear wheel/swingarm bearings............................ok
kajj is offline   Reply With Quote