View Single Post
Old 10-25-2012, 09:26 AM   #17726
Jim Moore
Beastly Adventurer
 
Jim Moore's Avatar
 
Joined: Dec 2001
Location: Jax, FL
Oddometer: 11,838
Quote:
Originally Posted by StoneAgeMan View Post
Have you ever driven a motorcycle with an engine that is: long-stroke, large-displacement, 45 degree V-twin, and with a shared piston throw on the crank? That's what it looks like he's operating, tons of low-end torque. Typically their second gear is good from about 8mph up to 48mph and will merrily yank you from one to the other pretty darn quick.

Their throttle is an on/off switch for jumping forward or backwards 20' (7 meters) almost instantly at almost any speed (except for at top-rpm or the very bottom portion of the rpm, which you don't use on that type of engine).

Long-stroke always means a very wide and flat torque curve and also means a lower top rpm. Only a short stroke engine can hit high rpms, but they have almost no low-end torque. Did you know that a big cruise ship engine typically operates around 10 or 15 RPM and has less than 60 rpm at full speed? It's actually much more about piston speed, typically measured in feet-per-second, long stroke travels farther per RPM. Like a long crowbar vs. a short crowbar.

StoneAge Man
Your technical jargon confused me a little bit, but is that why they're so fucking slow?
__________________
Jim Moore
Jax, FL

Pay the lady, PirateJohn, you thieving piece of garbage.
http://advrider.com/forums/showthread.php?t=949341
Jim Moore is offline   Reply With Quote