View Single Post
Old 10-29-2012, 01:36 PM   #14835
The Breeze
Gnarly Adventurer
 
Joined: Dec 2010
Location: Utah
Oddometer: 179
Quote:
Originally Posted by Yossarian™ View Post
A pull to the right means the front wheel is too far to the right, and needs to move left in respect to the hub. Using 1/4 turns of the spoke wrench, loosen all the spokes on the "from" side, then tighten all the spokes on the "to" side. Test ride, and repeat if condition still exists. This may take a half dozen or more iterations to get right, but doing it in small steps mitigates the possibility of putting the wheel out of true.

Doing this fixed my "right pull" issue; the bike now tracks straight as an arrow on level ground with hands off bars.
Excellent I'll try it and report back.
The Breeze is online now   Reply With Quote