View Single Post
Old 11-04-2012, 05:52 PM   #6
fbj913
I ride
 
fbj913's Avatar
 
Joined: Nov 2007
Location: KC MO
Oddometer: 2,345
Quote:
Originally Posted by fbj913 View Post
i had the pivot pegs and hated them. from the inside of the bike outward they are too small. it made my foot feel like it was going to roll off when standing. i would try the triumph ones if i tried again. or maybe buy the weld on type and just modify the stock pegs.
oh yeah and, if i remember right, if you look at the measurements of the pivot compared to stock they are about the same when it comes to length. the problem i could see was that the peg started a little closer to the connection point so the actual usable amount of peg is less. if that makes since...
fbj913 is offline   Reply With Quote