View Single Post
Old 11-04-2012, 06:04 PM   #6237
crankshaft OP
Guns are for pussies
 
crankshaft's Avatar
 
Joined: Aug 2004
Location: Burlingtron,VT
Oddometer: 13,974
Quote:
Originally Posted by offworlder View Post
I recently replaced the stock can on my 690 with the FMF Q4, and after examining the bike post ride, noticed the FMF was loose, even though the bolts are as tight as they can go. The FMF mounts via only one side of the exhaust mounting bracket. While the rubber grommets in the mounting bracket may introduce some play, they are likely present more so to decouple the pipe from the tank (shock absorption). If memory serves, the stock pipe was rock solid.

Anyone else experience this, and have a working fix ?

Thanks.
Tighten the clamp on the pipe, I have the same exhaust and its solid. Ridden all kinds of nasty with zero issues. You might be doing it wrong
__________________
Just say'IN
crankshaft is offline   Reply With Quote