Thread: Bicycle thread
View Single Post
Old 11-08-2012, 04:30 PM   #25976
Obstacle Allusion
YakSpout's Avatar
Joined: Dec 2003
Location: all by myself
Oddometer: 6,190
Originally Posted by pierce View Post
so, if you have the cheap ebay magicshine /clone/ lamp (NOT the 'real' magicshine), and you get the actionLED spreader lens, as action tells you, the lens on the clone lamp is thicker than the spreader lens. I hit up the hardware store and poked around at o-rings. I found a 1-9/16ths" OD 3/32" thick O-ring is the right outside diameter exactly, but its about 1/32nd too thick. I think the perfect o-ring to replace the one on the clone lamp would be 1-9/16ths OD and 1/16th thick, or 39mm OD and 1.5mm thick. o-rings are often sold by their ID, so that would be 1-7/16" or 36mm.

your mileage may vary. the spreader lens looks awesome in my livingroom, the beam is nice and wide now.
I picked up that spreader, so I'll keep an eye out for the right o-ring. My light is still somewhere in China.

Thanks for doing the legwork.
YakSpout is offline   Reply With Quote