Im currently installing a EM Drill thru subframe bolt upgrade because I dont have a choice in the matter. I wrecked on some ice last week and my sw motec bars took the brunt but in the process busted the bolt right off the frame leaving it stuck in there tighter then hell. Currenting drilling thru (about 2 hours along and im roughly 6/10 of the way there) and I'm wondering who in their right mind would do this mod with no reason!!! Its hard as hell to cut thru that metal and Im using a well lubed bit pulling out and cleaning it every few mm. Hopefully when I get home from work I can knock it out rather quickly and slap the bike back together. Im hoping HARD that I havnt screwed up and drilled untrue.
ANYWAY now that I'm doing this Im wondering if anybody have any Doohickey tools lying around that they would part with. Figured Id just knock everything out while I'm at it. I'd pass them on when I'm done with them as they pretty much are once use tools from what I understand.
2006 KLR650 Aztek Red / SW Motec Bars, Givi Top Case, Tank Bag, PMR Rear Luggage Guard, IMS Pro pegs, Mirror Relocation mod, Moose Folding Shift Lever, Gold Valve Cartridge Fork Emulators, T-Mod, Coleman Seat Cover, Tusk D-Flex Handguards, Horse Saddlebags, Drill Through Subframe Upgrade, 12.9 Bolts, Doohickey, 16TFS, AGM Battery, AeroLED Tail Light